Terrazzo tile 60×60 24″x24″ Mx010

“PRAKTIKA” series tiles, composed of granulates of mineral aggregates and white cement, in a single layer and high resistance.

Compared to any other cement-based agglomerate, the tiles of the “PRAKTIKA” series have a very limited degree of absorption. The total absence of macroporosity, the dimensional stability and the high physical characteristics make it possible to use it both indoors and outdoors. During the pressing phase (each individual tile is subjected to a pressure of over 1000 tons), most of the water present in the mixture is eliminated, leaving already at the exit of the press a solid product characterized by a very low water/cement. This peculiarity, added to the precise use of particularly selected raw materials and the best available white cement, make it possible to achieve these characteristics.

Compared to any other cement-based agglomerate, the tiles of the "PRAKTIKA" series have a very limited degree of absorption. The total absence of macroporosity, the dimensional stability and the high physical characteristics make it possible to use it both indoors and outdoors. During the pressing phase (each individual tile is subjected to a pressure of over 1000 tons), most of the water present in the mixture is eliminated, leaving already at the exit of the press a solid product characterized by a very low water/cement. This peculiarity, added to the precise use of particularly selected raw materials and the best available white cement, make it possible to achieve these characteristics.

Additional information

SPECIFICATION ITEM

Single thickness "PRAKTIKA" series tiles composed of:
"I MARMI" series: marble chips, white marble powder and white cement binder 5.25.
Any background colors are obtained with inorganic dyes. Produced with a fully automated production process at very high pressure, in order to obtain stable and non-deformable tiles, insensitive to humidity and with high mechanical characteristics. Totally free from glues, resins and/or materials that are not compatible with environmental protection requirements.
Specific weight of about 2500 kg/m3.
Class 0 fire reaction tiles. Total non-toxicity.
The lower part is mechanically ground to allow glue laying. Surface treated with water-oil repellent impregnating product.
The "PRAKTIKA" tiles of the "I Marmi" series, thanks to the fine structure of the aggregate used, are very resistant to the freeze/thaw cycle and are particularly suitable for installation in outdoor environments, after a markedly brushed surface finish to give the necessary grip.

TECHNICAL DETAILS

Geometric features

-Side length EN 13748-1 600.00 ± 0.2 %
-Tile thickness EN 13748-1 24.00-30.00 ± 0.8 mm. (600×600)
-Straightness of the sides of the upper face EN 13748-1 ± 0.2 % of the length of the considered side
-Flatness of the upper face EN 13748-1 0.3% of the length considered diagonally

Physical characteristics

-Tile weight Internal specifications 20.00-25.00 ± 2.00 Kg (600×600) Weight per m2
-Internal specifications 58.00-68.00 Kg ± 5.50 Kg (600×600) Reaction to fire ISO DIS 1182 Class 0
-Frost resistance EN 13748 – 2 Class 3 antifreeze L = max. 0.05 Kg/m2
-Water absorption at 24h EN 13748 W24h = max. 0.3 g/cm2
-Maximum water absorption EN 13748 Wm,a = max. 6% Mass density Kg/m3 = 2490 ± 2%
-Variation after 24 hours of immersion in water No dimensional variation, twisting or swelling of the tile.
-Electrical characteristics EN 14617 Antistatic Volume resistivity < 2×108
-Thermal conductivity EN 12825 Average value = 1.2 W/mK

Surface finish characteristics

-Slip resistance DIN 51130 Glossy surface Matt surface Brushed surface < R9 R9 > R9
-Abrasion resistance (with Capon abrasion tester) EN 13748-1 Fine and coarse grit < 24mm.

Reviews

There are no reviews yet.

Be the first to review “Terrazzo tile 60×60 24″x24″ Mx010”

Your email address will not be published. Required fields are marked *